WHAT IS AND HOW DOES ROLL-A-CARE WORK ?
ROLL – A – CARE is a low viscosity liquid, which prevents undercorrosion on flame sprayed and other porous layers.
ROLL – A – CARE penetrates even in the smallest pores and cracks, forging out the moist and leaves a moist repellent film behind on the substrate.
PROPERTIES
Layers treated with ROLL – A – CARE show excellent corrosion resistance when tested according to the following tests :
– Climate test acc. DIN 50 017
– Salt spray test acc. DIN 50 021
– Sulfur dioxide test acc. DIN 50 018
According to these tests ROLL – A – CARE gives far better protection than sealers.
ROLL – A – CARE is dissolvable in solvents based on petroleum, but will be, once applied, hard to remove from the layer.
APPLICATION
It’s best to apply ROLL – A – CARE immediately after the flame spraying, at a layer temperature of about 80 oC. It can be applied with spray equipment or brushes, or by submerging.
ROLL – A – CARE contains white spirit and is inflammable.
While spraying use an exhaust system and breath protection.
CONSUMPTION
Because ROLL-A-CARE fills op the pores and does not form a protective film , the consumption is very little. The theoretical consumption is equal to the porosity multiplied with the volume of the applied layer. However losses due to the application method must be regarded.
SAFETY
Follow the safety instructions from the safety data sheet while working with ROLL – A – CARE.
PACKAGING
Available in jerrycans 5 liter or 20 liter.
